Overview & Specifications
Please Note:
*The 20MAXX phone cradle is part of our "MAXX" series and offers Heavy-Duty spring tension. This level of tension is specifically engineered for Motorcycle, Extreme Off-Road, SXS, ATV, Open Top Driving, and other demanding applications.
- Double Ball Brake/Clutch Reservoir Mount: Compatible with most Brake Lever/ Clutch Reservoir assemblies on the market today. Equipped with 20mm mounting balls (x2) which enables you the ability to mount two holders at the same time such as a Phone Cradle, Drink Holder, GPS, or Action Camera. One of the most common bikes we see this mounted on is the 2014 or newer Harley-Davidson Street Glide with OEM bars. Typically, these models have limited bar space, and because the cables run so close to the bars, it makes it difficult to use a standard clamp.
- Universal Phone Compatibility: Our phone holder is designed to seamlessly work with nearly all smartphone models, cases, and sizes. While you're on the go, it ensures a secure fit for any device, whether or not it's in a case. Capable of securely holding devices up to 3.7" wide and 0.6" thick. Please check your device for proper fitment.
- Innovative Cradle Design: Experience the difference with our specially designed cradle. Unlike standard spring cradles, our octagon-shaped grips minimize heat transfer by pulling the phone away from the cradle's back on hot days. The spring mechanism is perfectly calibrated, allowing for effortless single-handed insertion & removal of mobile device without straining the mount base.
- Clip-In Grips: Traditionally, our previous generation phone cradle utilized double-sided 3M tape to secure the grips onto the cradle, a method commonly employed by other brands with similar-looking holders. However, in high temperatures, the double-sided tape could loosen, causing the grips to peel away. Our Clip-In Grips address this issue.
- Cradle Pin Sleeves Eliminate Cradle Buzz: Cradle buzz is a common issue in many of our competitors' current products. These metal cradles feature steel pins that run through them to support internal compression springs. However, the metal-on-metal contact, combined with vibrations from vehicles or motorcycles, can result in an irritating buzzing sound. We've eliminated this problem in our Enduro cradles by 'sleeving' the pins, ensuring quiet operation.
- Premium Materials: Real CNC Machined Black Anodized Aluminum. Glass Filled Resin Knob Molded over Stainless steel threaded inserts. Stainless Steel and Aluminum Internal supports.
- Short Reach Conversion: All of our long reach motorcycle mounts can be converted to short reach if necessary. This kit includes additional mounting components that provide you with the flexibility to convert this platform to better suit any shorter length mounting applications.
- Dual Socket Perfection: Although we have shorter arms available, the 3.5" metal arm provides solid support while minimizing vibration. Dual thumbscrews allow you to quickly loosen/tighten the ball and socket joints which allows for unlimited positioning. This arm will not break, bend, or boogie on you. It will stay right where you left it.
- Color Swap Compatible: Tackform offers a wide range of anodized billet aluminum knobs. This DuraLock arm is compatible with Tackform's DuraLock knobs, allowing you to customize your setup to match your vehicle. Black knobs are included.
- Tackform 20 Series: Specifically designed for compatibility with Tackform’s 20 Series Platform, revolving around the 20mm ball and socket system. While compatible with other 20mm products, our parts stand out for their tested durability and engineered load capacities, featuring a safety factor not guaranteed by other manufacturers. Please Note: Not suitable for 25.4mm / 1” / B-Sized balls.