Overview & Specifications
4 FXS, 2 GIGE, NAT Router
Key Features:
- 2 SIP profiles
- 4 FXS ports
- Dual Gigabit ports
- Built-in NAT router
- TLS & SRTP security encryption technology
- Automated provisioning options
- 3-way voice conferencing
- Failover SIP server
- T.38 Fax for creating Fax-over-IP
- Wide range of caller ID formats
Specifications:
Interfaces
- Telephone Interfaces - Four (4) FXS ports
- Network Interfaces - Two (2) 10/100/1000Mbps RJ45 ports
- LED Indicators - POWER, LAN, WAN, PHONE1, PHONE2
- Factory Reset Button - Yes
Voice, Fax, Modem
- Telephony Features - Caller ID display or block, call waiting, flash, blind or attended transfer, forward, hold, do not disturb, 3-way conference
- Fax Over IP - T.38 compliant Group 3 Fax Relay up to 14.4kpbs and auto-switch to G.711 for Fax Pass-through
- Short/Long Haul Ring Load - 3 REN, up to 1km on 24AWG line
- Caller ID - Bellcore Type 1 & 2, ETSI, BT, NTT, and DTMF-based CID
- Disconnect Methods - Busy Tone, Polarity Reversal/Wink, Loop Current
Signaling
- QoS - Layer 2 (802.1Q VLAN, SIP/RTP 802.1p) and Layer 3 (ToS, Diffserv, MPLS)
- DTMF Method - In-audio, RFC2833 and/or SIP INFO
- Provisioning and Control - HTTP, HTTPS, TELNET, TFTP, TR-069 , secure and automated provisioning using AES encryption, syslog
Security
- Media - SRTP
- Control - TLS/SIPS/HTTPS
- Management - Syslog support, telnet, remote management using web browser
Physical
Universal Power Supply Input - 100-240VAC, 50-60Hz
Output - 12V/0.5A
Environmental
- Operational - 32ºF – 104ºF (0ºC – 40ºC)
- Storage - 14ºF – 140ºF (-10ºC – 60ºC)
- Humidity - 10% – 90% Non-condensing
Dimension and Weight
- Dimensions - 28.5 x 130 x 90 mm (H x W x D)
- Weight - 353.33g