| Brand | Tackform 25 Series |
| SKU | CR-01L-25 |
| Barcode | 850044740048 |
| Variants | Version |
25LITE
25MAXX
25MAXX VIBE
*Cradle buzz is a common issue on many current competitors products and happened to some of our older discontinued products as well. These metal cradles have steel pins that run through them to support the internal compression springs.. This metal on metal contact paired with some level of vibration in a vehicle or on a motorcycle could lead to an annoying buzzing sound. We've eliminated this issue on these cradle by "sleeving" the pins.
**Recommended Arm Length - The MAXX Cradle is designed with approximately twice the spring strength as our LITE cradle. For this reason when you mount a MAXX Cradle on a arm longer than 3.5" you can experience slipping at the ball joint while inserting and removing a cradle with a single hand. If you are in an environment that requires the aggressive spring tension but you need an arm longer than 3.5" it's definitely OK, you just make have to use one hand to insert the phone, and the other hand to hold the mounting arm in place.
***Clip-In Grips - Traditionally our old phone cradles used double sided 3m tape to hold the grips onto the cradle, a method commonly used by other brands with similar looking holders. However, in high heat the double sided tape could come lose and the grips could peel away. Our Clip-In Grips solve that problem.